-
Welcome to Garage Floor Minneapolis
This blog is about everything finishing, protecting and maintaining Garage Floors in Minnesota.
-
Recent Posts
- The Ultra Top Coat for Garage Floor Coatings
- What is a “Pop-out” in your Garage Floor?
- Epoxy Floors, Failure and Removal
- Floor Drains and Minnesota Garage Floor Coatings
- Joe’s Garage: A Unique Example of a Garage Done Right
- Installing Garage Floor Coatings with the “Prep Perfect System”
- Repairing Concrete Cracks in Minnesota
- How to Clean a G-F One Garage Floor Coating
- Case Study: One Rough piece of Spancrete in Minneapolis
- How Spancrete is Constructed – Why it Matters for Garage Coatings
-
Tag Cloud
clean garage floor Cleaning Garage Floor Cold Weather Application Concrete Coating Concrete Coatings Concrete Crack Concrete Crack Fill Concrete Grinding Concrete Repair diamond grinding concrete dustless coating removal easy to clean garage epoxy garage floor epoxy removal failed epoxy G-F One Coatings garage coating Garage Coatings garage finishing Garage Floor Garage Floor Coating garage floor coatings garage floor drain Garage Floor Minneapolis garage remodeling Leaking Spancrete Minneapolis Pop Out prep perfect system Repair Concrete Spancrete ultra top coat
G-F One Coatings Archive
-
The Ultra Top Coat for Garage Floor Coatings
Posted on October 18, 2010 | No CommentsQuestion: How thick is your garage floor top coat? We hear this question all the time. Answer: Every coating manufacture and blender has a recommendation for the thickness of the coating wear surface or D-F-T (Dried Film Thickness). This recommendation is minimal at best and is based on... -
Joe’s Garage: A Unique Example of a Garage Done Right
Posted on October 11, 2010 | 2 CommentsHere’s the story: A pending kitchen remodel in 2003, forced us to move our kitchen temporarily into the garage. We built out the East Wall with a “pizza kitchen” with cabinets, refridgerator, microwave and sink. We also didn’t forget the stereo and TV. After eating... -
Repairing Concrete Cracks in Minnesota
Posted on October 6, 2010 | 1 CommentWhen it comes to prepping a concrete floor for polyurea/aspartic coatings, properly filling cracks and saw-cuts is critical to the long-term success of the flooring system. Improperly filled cracks, either with poor process or product, is a recipe for failure. Cracks are challenging for a... -
Case Study: One Rough piece of Spancrete in Minneapolis
Posted on October 6, 2010 | 2 CommentsHere’s one for the record books. This case study was designed to show you how we seal and coat a spancrete. Below are some pictures of the job. History: The home was built in Roseville Minnesota in the late 60′s on a lake. Underneathe the spancrete garage...